2026-11-18 名古屋大学
<関連情報>
- https://www.nagoya-u.ac.jp/researchinfo/result/2026/11/20261118-engg.html
- https://onlinelibrary.wiley.com/doi/10.1002/smll.76581
凍結電気二重層により、単層発光デバイスにおける酸化還元電位窓の制約を受けない超高電流注入を実現
Frozen Electric Double Layers Enable Redox-Window-Unlimited Ultrahigh Current Injection in Monolayer Light-Emitting Devices
Koshi Oi, Hao Ou, Takahiko Endo, Jiang Pu, Yasumitsu Miyata, Akitoshi Nakano, Taishi Takenobu
Small(Early View)2026年11月17日オンライン公開
DOI:https://doi.org/10.1002/smll.76581
Source: Oi, K., Ou, H., Endo, T., Pu, J., Miyata, Y., Nakano, A., & Takenobu, T. Small. https://doi.org/10.1002/smll.76581
Licensed under CC BY 4.0. https://creativecommons.org/licenses/by/4.0/
単層遷移金属ダイカルコゲナイド(TMDC)を用いた発光デバイスは、電解質ゲートによって高密度の電荷キャリアを蓄積できる一方、電解質の電気化学的安定性が許容する酸化還元電位窓によって印加電圧と電流密度が制限される。本研究では、この制約を回避するため、電気二重層を形成した後に電解質を凍結し、イオンの配置と蓄積キャリアを固定する手法を開発した。単層WSe₂を用いた二端子型発光デバイスにイオンゲル電解質を適用し、280 Kで電圧を印加して電気二重層と横方向PN接合を形成した後、電圧を維持したまま10 Kまで冷却した。これによりイオンの移動を抑制し、通常は電解質の酸化還元反応によって制限される電圧領域を超えた動作を実現した。凍結状態では最大20 Vの印加電圧において、最大電流密度806 kA/cm²(約0.8 MA/cm²)を達成し、室温動作時の最大値の約6.4倍に向上した。電流増加に伴って発光強度も増大し、測定範囲内では発光スペクトルの顕著な劣化は認められなかった。一方、20 Vでは高バイアスに伴う不安定化も示唆された。また、絶対外部量子効率は測定されていない。本手法は、原子層半導体発光デバイスにおける超高電流注入を可能にし、高密度励起子、ポラリトン、レーザー関連現象の電気駆動研究に向けた新たなデバイス設計手法となる可能性がある。
Electrolyte-gated light-emitting devices based on monolayer transition metal dichalcogenides (TMDCs) can achieve high carrier densities through electric-double-layer doping, but their operating voltage and current density are limited by the electrochemical stability window of the electrolyte. This study introduces a frozen-electric-double-layer strategy to overcome this limitation. A lateral PN junction was first formed in a monolayer WSe₂ device using an ion-gel electrolyte at 280 K. The device was then cooled to 10 K while maintaining the applied bias, immobilizing the ionic configuration and preserving the accumulated carriers. This approach enabled operation beyond the conventional electrochemical redox window. The frozen device sustained voltages up to 20 V and achieved a maximum current density of 806 kA cm⁻², approximately 6.4 times the maximum value obtained under room-temperature operation. Electroluminescence intensity increased with applied voltage, while no pronounced spectral degradation was observed within the measured voltage range. However, instability emerged under the most extreme 20 V operating condition, and absolute external quantum efficiency was not determined. These findings demonstrate a strategy for achieving ultrahigh current injection in atomically thin light emitters beyond the conventional electrochemical voltage limit. The approach may facilitate electrically driven investigations of high-density excitonic, polaritonic, and laser-related phenomena in two-dimensional optoelectronic devices.


