高圧蒸気滅菌で変わるステンレス鋼の腐食特性 -金属製医療器具の長寿命化への貢献に期待

2026-11-18 東京科学大学

本研究では、原子一層の二次元半導体を用いた発光素子において、従来の電気化学的な電圧上限を超えて高密度の電流を注入する技術を開発した。電解質中のイオンを利用する発光素子は、電子と正孔を高密度に蓄積できる一方、高電圧を加えると電解質の酸化還元反応が起こるため、動作電圧が約4 Vに制限されていた。研究グループは、電圧を加えて二次元半導体WSe₂にPN接合を形成した後、電圧を維持したまま素子を10 Kまで冷却し、電解質中のイオン配置を凍結する方法を考案した。これにより、従来の制限を超える20 Vでの動作を実現し、最大0.8 MA/cm²(約80万A/cm²)の電流密度を達成した。この高電流状態でも明瞭な発光が確認された。本技術は、高密度励起子やポラリトン状態の研究を可能にし、将来的には原子層半導体を用いた電流駆動レーザーなど、新しい光デバイスの開発につながると期待される。ただし、今回の成果は極低温での動作であり、実用的なレーザーの実現には、動作温度や安定性、発光効率などの課題が残る。

<関連情報>

オートクレーブ処理した304型ステンレス鋼のNaCl溶液中における腐食劣化の電気化学的解析
Electrochemical insight into corrosion degradation of autoclaved Type 304 stainless steel in NaCl solution

Takumi Kosaba, Eiji Tada
Journal of Materials Research and Technology, 45, 6475–6484 (2026)公開日:2026-10-29(Version of Record)
DOI:10.1016/j.jmrt.2026.10.215

高圧蒸気滅菌で変わるステンレス鋼の腐食特性 -金属製医療器具の長寿命化への貢献に期待
Fig. 1. SEM image and corresponding EDS maps of typical inclusions on as-polished Type 304 stainless steel.© Kosaba and Tada, 2026. Licensed under CC BY 4.0.

Tii-summary

本研究は、オートクレーブ処理が304型ステンレス鋼の塩化物環境における腐食挙動に及ぼす影響を、電気化学測定と表面分析によって検証したものである。研究チームは、100 mM NaCl溶液中で動電位アノード分極測定を行い、処理前後の不動態電流密度と孔食電位を比較するとともに、走査電子顕微鏡(SEM)、エネルギー分散型X線分析(EDS)、X線光電子分光法(XPS)によって表面状態と酸化皮膜の組成を解析した。その結果、オートクレーブ処理後のステンレス鋼では、不動態電流密度が約1桁低下した一方、孔食電位は約200 mV低下し、孔食に対する感受性が増加した。また、表面酸化皮膜中の鉄とクロムの濃度比(Fe/Cr)が大幅に低下しており、クロム濃縮による不動態皮膜の保護性能向上が不動態電流密度の低下に関係すると考えられた。一方、硫黄含有介在物から硫黄を除去することを主な目的とした電気化学的前処理と研磨処理によって、オートクレーブ処理材の孔食抵抗性が改善した。ただし、不動態電流密度には大きな変化が認められなかった。これらの結果は、オートクレーブ処理による不動態皮膜の変化と、硫黄含有介在物が孔食発生に及ぼす影響を区別して理解する重要性を示している。

This study investigated the effects of autoclave processing on the corrosion behavior of Type 304 stainless steel in chloride-containing environments using electrochemical measurements and surface characterization. The researchers conducted potentiodynamic anodic polarization tests in 100 mM NaCl and compared the passive current density and pitting potential before and after autoclave treatment. Surface morphology and oxide-film composition were examined using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). Autoclaved stainless steel exhibited an approximately tenfold reduction in passive current density, while its pitting potential decreased by approximately 200 mV, indicating increased susceptibility to pitting corrosion. XPS analysis also revealed a substantial decrease in the Fe/Cr ratio in the surface oxide film, suggesting chromium enrichment associated with the reduced passive current density. Furthermore, electrochemical pretreatment and polishing, primarily intended to promote sulfur removal from inclusions, improved the pitting corrosion resistance of autoclaved specimens, although they had little effect on passive current density. These findings highlight the importance of distinguishing between changes in passive-film properties and the contribution of sulfur-containing inclusions to pitting corrosion in autoclave-treated stainless steel.

0403電子応用
ad
ad
ad
タイトルとURLをコピーしました