原子一層の発光素子で「電圧の壁」を突破~二次元半導体に超高密度電流注入、次世代レーザー実現へ~

2026-11-18 名古屋大学

名古屋大学大学院工学研究科の研究グループらは、原子一層の二次元半導体WSe₂を用いた発光素子において、従来の電気化学的な電圧限界を超える超高密度電流注入を実現した。従来の電解質を利用した素子では、電解質の酸化還元反応によって動作電圧が約4 Vに制限されていた。研究グループは、電圧を印加して形成した電気二重層のイオン配置を、素子を極低温に冷却することで固定する手法を開発。これにより、従来の限界を超える20 Vの動作電圧と、最大0.8 MA/cm²(約80万A/cm²)の電流密度を達成し、その状態でも明瞭な発光を確認した。これは研究対象とした原子一層の発光素子における世界最高値と報告されている。本技術は、高密度励起子やポラリトンなどの物理現象の研究を可能にし、将来的には原子層半導体を用いた電流駆動レーザーなど、新しい光電子デバイスの開発につながると期待される。ただし、今回の成果は極低温での動作実証であり、レーザー発振そのものを実現したものではない。

<関連情報>

凍結電気二重層を利用した単層発光デバイスへの超高電流注入
Frozen Electric Double Layers Enable Redox-Window-Unlimited Ultrahigh Current Injection in Monolayer Light-Emitting Devices

Koshi Oi, Hao Ou, Takahiko Endo, Jiang Pu, Yasumitsu Miyata, Akitoshi Nakano, Taishi Takenobu
Small(2026年11月17日オンライン公開)
DOI: https://doi.org/10.1002/smll.76581

Details are in the caption following the image
FIGURE 1 Schematic illustration of the frozen monolayer WSe2 electric-double-layer light-emitting device (EDLED) and its operating principle. Arrows between panels indicate the transition between the illustrated device states. (a) Schematic overview of the EDLED. The lower part shows the device structure, consisting of two-terminal electrodes on a substrate, a monolayer WSe2 bridging the electrodes, and an electrolyte layer formed on top. The upper left and upper right show a photograph of the ionic liquid at room temperature and the chemical structures of [DEME][TFSI] and PS–PMMA–PS, respectively. (b) Initial ionic migration immediately after bias application between the two-terminal electrodes. The arrows indicate the direction of ion motion under the applied electric field. (c) Formation of ionic sheets at the monolayer/electrolyte interface after sufficient time under an applied voltage. (d) Formation of electric double layers (EDLs) at the monolayer/electrolyte interface following electron and hole injection. (e) Lateral PN junction formation induced by EDLs, leading to electroluminescence. (f) Frozen state of the EDLED at low temperature, in which the ions are immobilized, and the pre-formed PN junction is preserved. (g) Frozen EDLED operated at a bias beyond the electrochemical stability (redox) window. © Oi et al., 2026. Licensed under Creative Commons Attribution License (CC BY).

Tii-summary

電解質ゲート型の遷移金属カルコゲナイド(TMDC)発光デバイスは高いキャリア密度を実現できますが、電解質の電気化学的安定性(酸化還元電位窓)によって印加電圧が制限されます。本研究では、単層WSe₂に電気二重層を利用して横方向PN接合を形成し、電圧を印加したまま10 Kまで冷却することで、イオンの配置を固定する手法を開発しました。これにより、電気化学反応を抑えながら接合状態を維持し、従来の電圧制限を超える20 Vでの動作と、最大0.8 MA cm⁻²の電流密度を達成しました。発光強度は電圧の上昇に伴って増加し、スペクトル形状も大きく変化しませんでした。本技術は、原子層半導体を用いた高密度励起子・ポラリトンの生成や、電流駆動型レーザーなどの次世代光電子デバイスに向けた基盤技術となる可能性があります。
3. English Summary
Electrolyte-gated transition metal dichalcogenide (TMDC) light-emitting devices can achieve high carrier densities, but their operating voltage is limited by the electrochemical stability window of the electrolyte. In this study, the researchers developed a strategy to overcome this limitation by forming a lateral PN junction in monolayer WSe₂ using electric double-layer doping and then cooling the device to 10 K under an applied bias to immobilize the ionic configuration. This preserves the junction while suppressing electrochemical reactions, enabling operation at voltages up to 20 V and a maximum current density of 0.8 MA cm⁻². Electroluminescence intensity increased with applied voltage, while the emission spectrum remained largely unchanged. This approach could provide a foundation for next-generation optoelectronic devices based on atomically thin semiconductors, including electrically driven high-density excitonic and polaritonic systems and laser-relevant devices.
0403電子応用
ad
ad
ad
タイトルとURLをコピーしました