2026-11-18 ブルックヘブン国立研究所(BNL)
<関連情報>
揮発性共晶系によるペロブスカイト光電子デバイスの結晶化制御(Volatile eutectics to tailor crystallization for perovskite optoelectronics)
Jason J. Yoo, Connor J. Dolan, Seongsik Nam, Jinho Lee, Kyu Min Kang, Bong Joo Kang, Rushik Desai, Niranjana Mohan Kumar, Arkita Chakrabarti, Daesoo Kim, Jang Hee Cho, Donghyuk Chung, Jack R. Palmer, Kelly X. Vences, Zhewen J. D. Deng, Yanqi Luo, Barry Lai, Tao Zhou, Zhonghou Cai, Martin V. Holt, Andrew M. Kiss, In Sun Cho, Dong Hyun Kim, Jun Hong Noh, Mariana I. Bertoni, Arun Mannodi-Kanakkithodi, Dane W. deQuilettes, David P. Fenning, Seong Sik Shin
Science, Volume 394, Issue 6820, pp. 228–233
DOI:10.1126/science.aeb4554
ペロブスカイト太陽電池や発光ダイオード(LED)の性能向上には、薄膜中の結晶粒界や表面に生じる欠陥を減らし、電荷の再結合を抑制することが重要である。本研究では、臭化亜鉛と塩化メチルアンモニウムの添加剤が形成する揮発性共晶系を利用し、ハロゲン化物ペロブスカイトの結晶化を制御する手法を開発した。ナノプローブX線顕微鏡による解析から、熱処理中に共晶系が結晶粒界で局所的に融解し、結晶内部の構造欠陥密度を低減することを確認した。また、ハロゲン分布の均一化と粒界への亜鉛の偏析も観察された。この手法で作製した太陽電池は変換効率26.5%(認証値25.9%)、15 cm²を超えるミニモジュールは23.9%を達成した。さらに、85℃で1400時間連続動作させた小面積セルは初期効率の85.8%を維持し、LEDでは外部量子効率26.1%を実現した。特殊な高価な装置に依存しない結晶成長制御技術として、高効率・高安定性の光電子デバイスへの展開が期待される。
Improving the performance of perovskite solar cells and light-emitting diodes (LEDs) requires reducing defects at grain boundaries and surfaces that promote charge-carrier recombination. This study developed a crystallization-control strategy for halide perovskites using a volatile eutectic formed by zinc bromide and methylammonium chloride additives. Nanoprobe X-ray microscopy revealed that the eutectic locally melts at grain boundaries during annealing, reducing the density of intragranular structural defects. The treatment also homogenized the halide distribution and induced zinc segregation at grain boundaries. Solar cells fabricated using this approach achieved a power conversion efficiency of 26.5% (25.9% certified), while perovskite minimodules larger than 15 cm² reached 23.9%. Small-area cells retained 85.8% of their initial efficiency after 1,400 hours of continuous operation at 85°C. The approach also enabled perovskite LEDs with an external quantum efficiency of 26.1%. This crystallization strategy offers a route to high-efficiency and stable optoelectronic devices without relying on expensive specialized equipment.


