2026-11-16 北海道大学,科学技術振興機構
<関連情報>
- https://www.hokudai.ac.jp/news/2026/11/post-2505.html
- https://pubs.rsc.org/ta/article-abstract/doi/10.1039/d6ta07314j/1380147/Biomass-derived-chitosan-as-a-loading-density
バイオマス由来キトサンを利用した、励起状態分岐の制御と共触媒フリー光触媒による水素生成のための負荷密度可変型足場(Biomass-derived chitosan as a loading-density-tunable scaffold for excited-state branching and cocatalyst-free photocatalytic hydrogen evolution of a platinum porphyrin)
Kushal Mohan Gowda, Yasuko Osakada, Mamoru Fujitsuka, Can Liu, Satoru Takakusagi, Hiroshi Uji-i, Vasudevanpillai Biju, Yuta Takano
Journal of Materials Chemistry A (2026):2026-11-11
DOI:10.1039/D6TA07314J
本研究は、バイオマス由来の多糖類キトサンを、光機能性分子の高密度担持と光触媒反応を制御する材料基盤として利用する手法を開発した。白金ポルフィリンPtTCPPを部分アセチル化キトサンに共有結合させ、キトサンの繰り返し単位当たり0.050~0.85当量の範囲で担持密度を変化させた。その結果、低担持密度(0.25当量未満)ではPtTCPPが主に単量体として存在し、一重項酸素を生成するエネルギー移動経路が優勢となった。一方、担持密度を0.25当量以上に高めるとJ型の分子集合体が形成され、一重項酸素生成が抑制されて電子移動経路が促進された。さらに、水素生成速度は担持量0.050当量の11.1 mmol g⁻¹ h⁻¹から、0.50当量では72.7 mmol g⁻¹ h⁻¹に増加した(405 nm照射、窒素雰囲気下)。見かけの量子収率は0.4%であった。本研究は、キトサンへの分子担持密度が励起状態の反応経路を制御する重要な設計因子であり、バイオマス由来材料を用いた水素製造技術の開発に応用できることを示している。
This study developed a strategy using biomass-derived chitosan as a scaffold for controlling the loading density of photofunctional molecules and their photocatalytic activity. Platinum porphyrin PtTCPP was covalently grafted onto partially acetylated chitosan at loading levels ranging from 0.050 to 0.85 equivalents per chitosan repeating unit. At low loading densities below 0.25 equivalents, PtTCPP predominantly retained monomer-like photophysical properties and promoted energy transfer to oxygen, resulting in singlet oxygen generation. At loading densities of 0.25 equivalents or higher, J-type molecular assembly was promoted, suppressing singlet oxygen generation and favoring electron-transfer pathways. The hydrogen evolution rate increased from 11.1 mmol g⁻¹ h⁻¹ at 0.050 equivalents to 72.7 mmol g⁻¹ h⁻¹ at 0.50 equivalents under 405 nm irradiation in a nitrogen atmosphere. The apparent quantum yield was 0.4%. These findings establish chromophore loading density on chitosan as an important design parameter for controlling excited-state pathways and enhancing photocatalytic hydrogen production using biomass-derived materials.


