水滴の衝突・分裂による帯電メカニズムを解明 ―超撥水性メッシュを利用した雨滴発電技術への展開に期待―

2026-11-19 東北大学

東北大学とドイツ・マックス・プランク高分子研究所の研究グループは、超撥水性メッシュに水滴を衝突させた際に生じる帯電メカニズムを明らかにした。水滴がメッシュに衝突して細孔を通過・分裂する過程では、固体と液体の界面で電荷分離が起こり、帯電した微小液滴のスプレーが形成される。研究では、電荷測定と高速度カメラによる観察を組み合わせ、水滴の衝突条件によって、衝突直後に噴出する場合と、液滴が収縮・反発する際に噴出する場合とで帯電特性が異なることを示した。また、メッシュの開口サイズが小さく、ワイヤ径が細いほど、噴出液滴の電荷対質量比が高くなることを確認した。これらの知見は、水滴の破砕と界面での電荷分離を効率的に利用するための設計指針となる。外部電源や駆動部を必要とせず、雨滴の落下エネルギーから電気を取り出す受動型の環境発電システムへの応用が期待される。ただし、今回の成果は帯電現象とその条件依存性の解明であり、実用的な発電装置の発電効率や出力を実証したものではない。

<関連情報>

液滴噴霧の帯電(Drop spray electrification)

Riko Kazama, Masaya Toda, Hans-Jürgen Butt, Rutvik Lathia
Physics of Fluids 38, 117417 (2026):2026-11-17
DOI:https://doi.org/10.1063/5.0355532

Experimental setup and droplet impact dynamics on a superhydrophobic steel mesh. (a) A water drop falls from a grounded needle onto the mesh, while secondary droplets passing through the mesh are collected in a Faraday cup connected to an electrometer; a high-speed camera records the impact. (b) Scanning electron microscopy image of the superhydrophobic steel mesh, with a magnified view showing its micro- and nanoscale surface texture. (c) Contact-angle image showing strong water repellency of the mesh. (d) High-speed sequence showing a 25 μl water drop spreading on the mesh, penetrating through the pores, retracting, and rebounding at a Weber number of ∼100.
FIG. 1.(a) Experimental setup for drop impact on superhydrophobic meshes and measurement of charge from spray. (b) SEM image of a steel mesh (ω= 400μm⁠, and dω = 330 μm⁠⁠) with a superhydrophobic coating. Inset: structures on mesh at micro-nano scales. (c) Static contact angle measurement for the superhydrophobic steel mesh. (d) High-speed images of 25 μl drop impact on steel mesh at We ∼ 100.© Kazama et al., 2026. Licensed under [CC BY 4.0]

Tii-summary

水滴の衝突や破砕に伴う電荷分離は古くから知られているが、超撥水メッシュを通過する液滴の噴霧形成と帯電の関係は十分に解明されていなかった。本研究では、超撥水処理した金属・樹脂メッシュに水滴を衝突させ、ファラデーカップによる電荷測定と高速度撮影によって、噴霧の生成過程と帯電機構を調べた。その結果、液滴がメッシュを貫通する前には帯電が検出されず、低ウェーバー数では液滴の収縮時に発生する反跳ジェット、中間領域では反跳ジェットと衝突ジェット、高ウェーバー数では衝突ジェットが主に帯電に寄与することが示された。メッシュの孔径を小さくすると噴霧質量当たりの電荷量が約1桁増加し、導電性メッシュでは残留電荷が放散されるため、連続衝突時にも安定した帯電が得られた。一方、食塩濃度や表面コーティングの耐久性も帯電性能に影響した。最大出力は外部負荷抵抗1 GΩで約28 nW/g(回収噴霧質量当たり)であり、実用的な発電にはさらなる構造最適化と耐久性向上が必要である。本研究は、雨滴の運動エネルギーを利用した受動型電荷回収システムの設計に向けた基礎的知見を提供する。

Charge separation during droplet impact and fragmentation has long been recognized, but the relationship between spray formation and electrification on superhydrophobic meshes has remained unclear. In this study, water drops were impacted onto superhydrophobic metal and polymer meshes, and the resulting spray was investigated using Faraday-cup charge measurements and high-speed imaging. The results revealed that no measurable charge was generated before liquid penetration through the mesh. At low Weber numbers, charging was dominated by recoil jets formed during droplet retraction; at intermediate values, both recoil and impact-induced jets contributed; and at high Weber numbers, impact-induced penetration became the dominant mechanism. Reducing the mesh pore size increased the charge-to-spray-mass ratio by nearly an order of magnitude. Conductive meshes also maintained stable charging during repeated impacts by dissipating residual surface charge. Salt concentration and coating durability further influenced charging performance. The maximum mass-normalized power output was approximately 28 nW/g of collected spray at an external load resistance of 1 GΩ, indicating that further optimization and improved durability are required for practical energy harvesting. These findings provide fundamental design principles for passive charge collection and potential rain-driven energy-harvesting systems.

1701物理及び化学
ad
ad
ad
タイトルとURLをコピーしました