2025-01-07 ワシントン州立大学
＜関連情報＞
- https://news.wsu.edu/press-release/2025/01/07/method-can-detect-harmful-salts-forming-in-nuclear-waste-melters/
- https://www.sciencedirect.com/science/article/abs/pii/S0263224124021511
ミリ波放射計と干渉計を用いたガラス固化中の塩形成のインライン検出 In-line detection of salt formation during vitrification using millimeter wave radiometry and interferometry
John M. Bussey, Ian A. Wells, Natalie J. Smith-Gray, John S. McCloy
Measurement Available online: 19 November 2024
DOI:https://doi.org/10.1016/j.measurement.2024.116266
Graphical abstract
Highlights
- Millimeter wave technology demonstrated for high temperature in-line monitoring.
- MMW/THz radiometry used to identify phase change and optical properties of melts.
- Na2SO4 salt formation unexpectedly identified in minuscule quantities.
- MMW/THz interferometry observed volatilization and foaming.
- Broad potential manufacturing applications discussed.
Abstract
Vitrification is an internationally significant industrial process used for the treatment and immobilization of hazardous and radioactive waste. For successful silicate melt vitrification, molten salt formation during melter operation must be avoided. As such, proper process controls and continuous monitoring are critical to minimizing melting problems. Several in-situ process technologies for glass melters are well-developed; however, the lack of in-situ surface salt formation detection methods presents a risk to vitrification at the Waste Treatment & Immobilization Plant (WTP) on the US Hanford Site. While proposed previously, millimeter wave (MMW) radiometry and interferometry are demonstrated for the first time for in-line detection of salt formation in simulated nuclear waste glass melts. The experimental radiometer and interferometer setup uses the optical properties of the melt and a dual receiver operating at ∼ 137 GHz to elucidate melting behavior. A series of previously characterized glasses supersaturated with sulfate (Na2SO4), chloride (NaCl), or fluoride (NaF) salts are analyzed using the MMW system. This provides insight into volatile losses, fining, salt formation, salt identity, crystallization, and optical properties of a heterogeneous melt. Relevant terahertz (MMW/THz) optical properties are also compiled. Millimeter wave measurements are evaluated here for the ability to detect phase changes in salt-forming glass melt compositions without opaque body radiometry assumptions. This contribution demonstrates MMW radiometry with interferometry as a useful method for in-situ salt detection, enabling risk reduction in nuclear waste vitrification melters.
