2026-07-16 パシフィック・ノースウェスト国立研究所（PNNL）
＜関連情報＞
- https://www.pnnl.gov/news-media/kate-rader-and-aashish-rohatgi-lead-award-winning-research-advancing-aluminum
- https://link.springer.com/article/10.1007/s11661-025-07939-6
市販のAl-Si-Mg合金の凝固過程における超音波微細構造微細化のその場シンクロトロンX線回折 In-Situ Synchrotron X-Ray Diffraction of Ultrasonic Microstructural Refinement During Solidification in a Commercial Al–Si–Mg Alloy
Katherine E. Rader,Andrew Chuang,Mark Bowden,Alan Schemer-Kohrn,Jonova Thomas,Dileep Singh & Aashish Rohatgi
Metallurgical and Materials Transactions A Published:04 September 2025
DOI:https://doi.org/10.1007/s11661-025-07939-6
Abstract
This study reports the first use of in-situ synchrotron X-ray diffraction (SXRD) to study the effects of ultrasonic melt processing (USMP) on phase and grain size evolution during solidification in a commercial Al–Si–Mg casting alloy. USMP is a technique that, when applied to aluminum as it solidifies, can be used to refine the local microstructure of large-scale castings. Analysis of the in-situ SXRD data to estimate the average grain size of primary α-Al grains during USMP demonstrates that USMP slows the growth rate of α-Al grains and reduces grain size by 36 pct. There is also evidence that USMP causes the primary α-Al grains to move relative to the X-ray beam; such motion increases the probability of primary α-Al grains colliding and fragmenting. This movement becomes constrained at the onset of the Al–Si binary eutectic, suggesting that USMP ceases to effectively refine the microstructure once the Al–Si binary eutectic begins to form. Complementary laboratory-scale X-ray diffraction (XRD) data were used to correlate the lattice parameters of the α-Al and Si (D-A4) phases with temperature to estimate cooling rate during solidification. Thus, this study can guide the design of novel castings with spatially distributed fine-grained regions produced using local ultrasonic processing.
