2026-11-16 中国科学院(CAS)

Photochemical deposition tracing reveals spatial separation of photogenerated charges. (Image by IMR)
<関連情報>
- https://english.cas.cn/newsroom/research-news/202611/t20261111_1214952.shtml
- https://advanced.onlinelibrary.wiley.com/doi/10.1002/aenm.71670
記述子に基づく多元素ドーピングによる高性能コバルトフリー・ニッケルリッチ正極材料の実現(Descriptor-informed multi-component doping enables high-performance Co-free Ni-rich cathodes)
Siqi Guan, Tong Yu, Pei Tang, Huize Wu, Qian Wei, Nan Piao, Lixiang Li, Jianqiu Zhu, Linjuan Zhang, Baigang An, Yutao Niu, Guangjian Hu, Zhenhua Sun, Chunyang Wang, Hui-Ming Cheng, Feng Li
Nature Synthesis (2026)
DOI:10.1038/s44160-026-01152-y
リチウムイオン電池の高エネルギー密度化に有望なコバルトフリー・ニッケルリッチ層状酸化物正極は、リチウムイオンの移動速度が遅いことや、充放電に伴う容量劣化が課題となっている。本研究では、従来の経験的な元素選択に代わり、ドーパントのイオン電荷密度と金属-酸素結合強度という2つの物理化学的指標に基づく多元素ドーピング設計手法を開発した。具体的には、イオン電荷密度の低いマグネシウム(Mg)とカルシウム(Ca)によってリチウムイオン移動時の静電的障壁を低減し、金属-酸素結合の強いチタン(Ti)とジルコニウム(Zr)によって酸素骨格と結晶構造を安定化した。この手法で開発した正極材料MD-LNMOは、25℃、25Cの高倍率条件で130.9 mAh/gの容量を示し、10Cで350回充放電した後も82.4%の容量を維持した。また、-20℃、1Cでも112.2 mAh/gの容量を達成した。さらに、5.74 Ahのパウチ型電池で-20℃における278.6 Wh/kgのエネルギー密度を実証した。構造・化学的解析から、リチウムイオン輸送の促進、充放電に伴う有害な相転移の抑制、機械化学的疲労の軽減が確認された。本研究は、物理化学的指標に基づく合理的な材料設計によって、高出力・長寿命・低温動作を両立する次世代リチウムイオン電池正極の開発につながる成果である。
Cobalt-free, nickel-rich layered oxide cathodes are promising materials for high-energy lithium-ion batteries, but their practical application is hindered by sluggish lithium-ion transport and rapid capacity degradation. This study developed a descriptor-informed multi-component doping strategy based on two physicochemical parameters: dopant ionic charge density and metal–oxygen bond strength. Magnesium (Mg) and calcium (Ca), which have low ionic charge densities, were introduced to reduce electrostatic barriers to lithium-ion migration, while titanium (Ti) and zirconium (Zr), which form strong metal–oxygen bonds, were used to stabilize the oxygen sublattice and crystal framework. The resulting cathode material, MD-LNMO, achieved a specific capacity of 130.9 mAh/g at 25 C and 25 °C, retaining 82.4% of its capacity after 350 cycles at 10 C. It also delivered 112.2 mAh/g at 1 C and −20 °C. Furthermore, a 5.74 Ah pouch cell achieved an energy density of 278.6 Wh/kg at −20 °C. Structural and chemical analyses confirmed enhanced lithium-ion transport, suppression of detrimental phase transitions during cycling, and mitigation of chemomechanical fatigue. This study establishes a rational materials-design approach based on physicochemical descriptors, offering a promising pathway toward high-power, long-life, and low-temperature lithium-ion battery cathodes.
原論文:Nature Synthesis

