二次元力測定ローラースキー(Two-dimensional force measurement roller skis)

ad

2023-05-16 フィンランド技術研究センター(VTT)

◆トップスキーヤーをサポートするために、スケーティングスタイルの二次元力計測ローラースキーを開発しました。このローラースキーは、ドライランドトレーニングシーズン中の多くのスキーヤーにとって重要なトレーニングツールであり、スキーテクニックを詳細に分析するのに役立ちます。
◆VTT MIKESが開発したこのローラースキーは、スキーヤーが生成する鉛直力と中側方力を計測することができます。開発プロセスには、ローラースキーフレームの応力モデリングやシミュレーション、フレームの製造、ひずみゲージの計器設置とキャリブレーションなどが含まれました。設計仕様では、鉛直方向の力は最大で1400 N、中側方向の力は最大で400 Nとされました。
◆開発された力計測ローラースキーは、二次元の力を測定する実用的なツールであることが検証されました。また、このローラースキーの追加の重量が成人スキーヤーのパフォーマンスにほとんど影響を与えないことも確認されました。今後の研究において、この新しい力計測ローラースキーは日常のトレーニング中に有用なデータを提供することが期待されます。

<関連情報>

2次元力測定ローラースキーの検証および実用化について Validation of 2D Force Measurement Roller Ski and Practical Application

Shuang Zhao,Vesa Linnamo,Keijo Ruotsalainen,Stefan Lindinger,Timo Kananen,Petri Koponen and Olli Ohtonen
Sensors  Published: 15 December 2022
DOI:https://doi.org/10.3390/s22249856

Sensors 22 09856 g001 550

Abstract

Several methods could be used to measure the forces from skis or roller skis in cross-country skiing. Equipment that could measure medio-lateral forces may be of good help for investigating the relevant skating techniques. The aim of this study was to validate a pair of newly designed two-dimensional force measurement roller skis. The vertical and medio-lateral forces which were perpendicular to the body of the roller ski could be measured. Forces were resolved into the global coordinate system and compared with the force components measured by a force plate. A static and dynamic loading situation for the force measurement roller ski was performed to reveal the validity of the system. To demonstrate whether the force measurement roller ski would affect roller skiing performance on a treadmill, a maximum speed test with the V2 technique was performed by using both normal and force measurement roller skis. The force-time curves obtained by these two different force measurement systems were shown to have high similarity (coefficient of multiple correlations > 0.940). The absolute difference for the forces in the X and Z directions over one push-off cycle was 3.9–33.3 N. The extra weight (333 g) of the force measurement roller ski did not affect the performance of the skiers. Overall, the newly designed two-dimensional force measurement roller ski in this study is valid for use in future research during daily training for skate skiing techniques.

ad

0100機械一般
ad
ad
Follow
ad
タイトルとURLをコピーしました