鉱石からリチウムを直接抽出で高温焼成が不要に ―省エネルギー型リチウム製造プロセスの実現に向けて―

2026-11-18 東北大学

東北大学の研究グループは、代表的なリチウム鉱石であるα-スポジュメンから、従来必要とされていた1000℃以上の高温焼成を行わずにリチウムを直接抽出する新しい技術を開発した。研究では、炭酸水素ナトリウム(NaHCO₃)とカンラン石を組み合わせ、約300℃の水熱条件下で鉱物間の溶解・沈殿反応を促進する手法を採用した。これにより、化学的に安定なα-スポジュメンの結晶構造を高温焼成によってβ型に変換する従来工程を省略しながら、リチウム抽出効率を大幅に向上させることに成功した。カンラン石の添加によって溶液中のケイ素やアルミニウムの化学状態が変化し、二次鉱物の生成を通じてスポジュメンの溶解が促進されることが重要な反応機構となっている。本技術は、リチウム製造に必要な熱エネルギーの削減と、温室効果ガス排出量や製造コストの低減につながる可能性がある。電気自動車や蓄電池の普及に伴って拡大するリチウム需要に対応する、次世代の資源回収プロセスとして期待される。

<関連情報>

地熱条件下におけるα-スポジュメンからの無焼成リチウム抽出を、鉱物の溶解・沈殿連動反応が溶液化学の制御によって促進する
Coupled mineral dissolution–precipitation regulates solution chemistry for calcination-free lithium extraction from α-spodumene under geothermal conditions

Jiajie Wang, Yuino Kimura, Noriaki Watanabe
Geothermics, Volume 143, Article 103896
DOI:https://doi.org/10.1016/j.geothermics.2026.103896

Tii-summary

リチウムイオン電池の需要拡大に伴い、重要なリチウム資源であるスポジュメンからの低環境負荷な抽出技術が求められている。従来の工業プロセスでは、α-スポジュメンを1000℃以上で焼成して反応性の高いβ相に転換した後、酸浸出によってリチウムを回収する。本研究では、この焼成工程を省略するため、重炭酸ナトリウム(NaHCO₃)によるα-スポジュメンの溶解と、かんらん石(オリビン)を利用した二次鉱物の沈殿を組み合わせる水熱処理法を開発した。250℃および300℃で実験した結果、300℃、0.5 mol/L NaHCO₃の条件で、α-スポジュメンとかんらん石を併用すると、6時間後のリチウム抽出率は74.1±2.6%に達した。これはNaHCO₃のみを用いた場合の39.7%、水のみの場合の2.0%を大きく上回る。分析の結果、かんらん石の溶解によって供給されたMgやFeを含む二次鉱物が、α-スポジュメンから溶出したSiやAlを取り込み、溶液中への蓄積を抑制していた。特に、スメクタイトや炭酸塩を含むNa–Mg–Al–Si系鉱物が主にかんらん石粒子の周辺に形成され、リチウムの継続的な溶出を可能にしていた。また、250℃でも同様の反応経路が確認されたが、抽出率は16.8%にとどまった。本手法は焼成を伴わないリチウム抽出の新たな可能性を示す一方、鉱物濃度、試薬使用量、エネルギー効率、後段のリチウム回収工程の最適化と実用性評価が今後の課題である。

The growing demand for lithium-ion batteries has increased the need for more sustainable methods of extracting lithium from spodumene, an important hard-rock lithium resource. Conventional industrial processing requires calcination of α-spodumene at temperatures exceeding 1000°C to transform it into the more reactive β-phase, followed by acid leaching. This study developed a hydrothermal approach to extract lithium directly from α-spodumene without prior calcination by combining sodium bicarbonate (NaHCO₃)-promoted dissolution with olivine-mediated secondary mineral precipitation. Experiments were conducted at 250°C and 300°C. At 300°C in 0.5 mol/L NaHCO₃ solution, the combined α-spodumene–olivine system achieved a lithium extraction yield of 74.1 ± 2.6% after 6 hours, substantially higher than the 39.7% obtained with NaHCO₃ alone and 2.0% with water alone. Mineralogical and chemical analyses showed that Mg- and Fe-bearing secondary minerals formed through olivine alteration incorporated Si and Al released from α-spodumene, limiting their accumulation in solution. Smectite and a carbonate-bearing Na–Mg–Al–Si phase formed predominantly on or near olivine particles, allowing lithium to continue dissolving into the aqueous phase. The same coupled dissolution–precipitation pathway remained active at 250°C, although lithium extraction reached only 16.8% after 6 hours. These findings demonstrate a potential calcination-free route for lithium mobilization from α-spodumene through the regulation of solution chemistry. Further optimization of mineral loading, reagent consumption, energy efficiency, and downstream lithium recovery is required before industrial feasibility can be established.

0702非鉄生産システム
ad
ad
ad
タイトルとURLをコピーしました